Xerox 4635 - Manual (Page 77)

6. OSS (operating system software)
messages
The OS messages appearing on your system controller display are
generated by the operating system software (OSS). These
messages are assigned to levels 0 through 9. The higher the
number, the more serious the problem or condition being
reported. The first digit after “OS” indicates the message level.
For example, OS7210 is a Level 7 message. Your 4635 LPS
Operator Guide and 4635 LPS Operations Reference provide
detailed information about LPS operations and related messages.
OS Level 0: Confirmation
Confirms that the 4635 LPS is responding.
OS0010 Resuming input
The CONTINUE or CONTINUE I command was entered, or the
key was pressed. System is reading data onto the
system disk.
Action None.
OS0020 Resuming output
The CONTINUE or CONTINUE O command was entered, or the
key was pressed. The system is printing data from the
system disk.
Action None.
OS0030 System is “ONLINE”
The ONLINE command was entered. The system is ready to
receive data through a host channel.
Action None.
OS0040 System is “OFFLINE”
The OFFLINE command was entered. The system is not
connected to a host channel and is not able to receive data from
a host.
Action None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-1