Xerox 4635 - Manual (Page 63)

IFU (INTERPRESS FONT UTILITY) MESSAGES
IF7104 IPFNTS.SYS open error
The system is unable to access the IPFNTS.SYS file.
Action Create a new IFU IPFNTS.SYS file by executing the IFU IPFNTS
command.
IF7105 Output file will not open
The medium specified (tape, disk, etc.) does not contain the
external file requested
Action Verify the file name and, if it exists on the medium, reenter the
command. (Refer to your 4635 LPS Operations Reference
chapter on managing LPS resources for additional information.)
IF7106 Print file will not open
The IFU LIST command cannot open the .DAT print file to
process. This is probably a disk error.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF7108 Temporary file x of decomposed FIS will not open
There is an IFU temporary access problem, probably due to a
disk error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7109 JSL storage request has failed.
An error occurred when requesting memory for the IPFNTS.JSL
file. This is probably due to a disk error or insufficient disk
space.
Action 1. Compress the disk and retry the command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.
IF7701 Error generating font file x; aborting ADD
There is a font profile access problem, probably due to a disk
error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7702 Error processing the font profile
There is a font profile access problem, probably due to a disk
error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 5-25