Xerox 4635 User Manual
Page 45
IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2052
The wrong volume has been mounted
The tape or cartridge has been mounted out of sequence. A
message will follow indicating the correct volume to mount and
ask whether you want to continue or quit the operation.
Action
1. Mount the correct volume.
2. Enter C to continue.
or
Discontinue the operation.
IF2053
The wrong volume for this volume set has been mounted
The correct volume number has been loaded, but it is not from
the volume set of the previously read volume. A message will
follow indicating the correct volume to mount and ask whether
you want to continue or quit the operation.
Action
1. Mount the correct volume from the previously read set.
2. Enter C to continue.
or
Discontinue the operation.
IF2060
Medium not positioned at IFU COPY label. Please reposition
the medium or mount the correct medium
An IFU COPY label is not present to allow processing to begin.
Action
1. Reposition medium at start of volume if it is the correct
medium
or
mount the correct volume.
2. Retry the command.
IF2061
Attempting to append to a non IFU COPY medium. Mount
correct medium or initialize the medium and retry
Appending an IFU COPY WRITE file to the end of a non IFU
COPY medium is not permitted.
Action
1. Mount the correct tape
or
Initialize the medium via the IFU VOLINIT command if the
data on the tape is not needed. (Refer to your 4635 LPS
Operations Reference chapter on managing LPS resources for
additional information.)
2. Retry the comand.
IF2062
This is an IFU COPY medium but it contains no IFU data.
please mount the correct medium to read
There is no data on the medium to read.
Action
1. Mount the correct medium with the needed data.
2. Enter C to continue reading.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
5-7