Xerox 4635 - Manual (Page 117)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS Level 2: Routine Maintenance
States a condition and explains what action(s) to take.
OS2000 Enter ‘CONTINUE O’ to resume printing
or
Select ‘CONTINUE O’ to resume printing
Printing was interrupted by the entered command or a system
rollover. The system is now ready to continue printing.
The printer control console displays:
PRESS ‘CONTINUE’ TO RESUME PRINTING
Action Enter the CONTINUE O command or press the key to
continue printing the interrupted job.
OS2002 Check paper supply in Tray 1
Fewer than 25 sheets remain in (feeder) tray 1.
The printer control console displays one of the following:
CHECK PAPER SUPPLY IN TRAY 1
JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 1
PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 1
READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 1
Action 1. Add paper to (feeder) tray 1. (Refer to the chapter on feeder
trays in your 4635 LPS Operator Guide.)
2. Press the key to resume printing.
OS2003 Check paper supply in Tray 2
Fewer than 25 sheets remain in (feeder) tray 2.
The printer control console displays one of the following:
CHECK PAPER SUPPLY IN TRAY 2
JOB IS PRINTING--CHECK PAPER SUPPLY IN TRAY 2
PRINTER IS WARMING UP--CHECK PAPER SUPPLY IN TRAY 2
READY TO PRINT--CHECK PAPER SUPPLY IN TRAY 2
Action Add paper to feeder tray 2. has. (Refer to the chapter on feeder
trays in your 4635 LPS Operator Guide.)
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-41