Xerox 4635 - Manual (Page 132)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2673 Enter the SUB INK Command or Abort the Print Job.
The printer requires a primary color that is not currently loaded.
This message prompts you with two available options:
Action Enter a SUBSTITUTE INK command
or
Abort the print job.
OS2674 Enter the PQA Start Command.
The black and/or color housing(s) is not ready
Action Enter the PQA START command.
OS2675 Abort the Report or Print Job.
The printer requires a primary color that is not currently loaded.
The message prompts you to perform one of several possible
options, such as:
Action Enter a SUBSTITUTE INK command
or
Load the required color housing
or
Abort the job.
OS2676 Ink substitution is not allowed by this job.
You have requested ink substitution but ink substitution is not
allowed by the job.
Action None.
OS2677 No ink substitutions are in effect.
This message follows a successful print quality adjustment when
no ink substitutions are currently in effect.
Action None.
OS2678 Ink requested by the job is not available.
This command is used in a variety of conditions, usually when the
job calls for an ink that has not been defined. There is no
operator action, the report will either be aborted or the current
dry ink will be substituted automatically.
Action None.
OS2679 Report aborted per job request
The printer requires a primary color that is not currently loaded.
The job specifies that the report be aborted in this situation.
Action None.
OS2680 Print Quality Adjustment is required for color printing.
The color housing is not ready.
Action Perform a print quality adjustment (PQA) before using the color
housing for color printing.
6-56 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE