Xerox 4635 - Manual (Page 109)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1745 Reset in progress, key-in ignored
The command entered cannot be processed at this time. The
system is removing all jobs from queue and clearing any sheets in
the paper path.
Action Reenter the desired command when READY FOR COMMANDS
appears on the display.
OS1750 Nothing to abort
The ABORT I, ABORT O, or ABORT job command was entered
and cannot be processed. No jobs are currently queued, being
input, or printing.
Action None.
OS1760 Reel-to-reel tape unit selected
The magnetic tape drive has been selected.
Action None.
OS1761 Cartridge tape unit selected
The 180 CTS has been selected.
Action None.
OS1765 Tape unit x selected
The tape unit indicated in the message has been selected.
Action None.
OS1766 Input tape device initialized to x:
This message names the selected input tape device being used.
Action None.
OS1770 “ONLINE” input is waiting for data
The START and ONLINE commands were entered. The system is
online to a host computer and is waiting for data to be
transmitted from the host.
Action None.
OS1780 “ONLINE” input is receiving data
Data is being transmitted from the host and written to the system
disk.
Action None.
OS1781 “ONLINE” JDE/JDL Host and device type mismatch
The JDE/JDL in effect is incorrect or contains unsupported
options.
Action Recode JDE/JDL. (Refer to your 4635 LPS PDL/DJDE Reference.)
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-33