Xerox 4635 - Manual (Page 169)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS6900 Data on page exceeds page size. Check output.
There is too much data to fit on the page being imaged. Some
data may have been imaged off the page.
Action Check printed output. If overflow has occurred, recreate the job
using a smaller font or fewer lines per page. (Refer to your 4635
LPS PDL/DJDE Reference.)
OS6905 Data origin off page. Check output.
Print will start at a point off the page.
Action 1. Check printed output.
2. If any data did not print within the desired page boundaries,
check VFU statements and recode JSL. (Refer to your 4635
LPS PDL/DJDE Reference.)
OS6906 Graphic origin off page. Check output.
JSL or DJDE indicates a graphic has been positioned at a point off
the page.
Action 1. Check printed output.
2. If the entire graphic did not print at the desired location on
the page, recode JDE/DJDE. (Refer to your 4635 LPS
PDL/DJDE Reference.)
OS6907 Printer not capable of printing two color graphic ‘Filename’.
You have attempted to print a two color graphic on a printer that
is not equipped with a Graphics Video Generator 2 (GVG2). The
system is informing you that you cannot do this on your system.
Action None.
OS6908 Page ordering has been reversed. Check ordered stock.
An N to 1 Ordered Stock job has thresholded in Input
processing, so the job has reverted back to 1 to N processing.
Any Ordered Stock that has been reverse collated for N to 1
printing must be recollated for 1 to N printing.
Action Reallocate stock and press CONTINUE.
OS6909 Misregistration detected. Pages will be purged.
A paper misregistration has been detected by the printer. Any
misregistered pages will be purged, and the pages reimaged.
Action None.
OS6910 Too much data on page. Page can not be printed.
Variable and/or form data will not fit on the page currently being
imaged. The page will not print.
Action Recreate the job, reducing the amount of data per page.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-93