Xerox 4635 - Manual (Page 202)

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES
PR2710 Scale factor invalid, check and retry.
The “n/d” scale parameter of the HARDCOPY command was
entered incorrectly.
Action Reenter the command correctly. (Refer to your 4635 LPS
Operations Reference chapter on running print jobs.)
PR2720 HPOS value out of range, check and retry.
The number entered for horizontal position (hpos) parameter of
HARDCOPY command was beyond the permitted range.
Action Reenter the command correctly. (Refer to your 4635 LPS
Operations Reference chapter on running print jobs for
additional information.)
PR2730 VPOS value out of range, check and retry.
The number entered for the vertical position (vpos) parameter of
HARDCOPY command was beyond the permitted range.
Action Reenter the command correctly. (Refer to your 4635 LPS
Operations Reference chapter on running print jobs for
additional information.)
PR2760 File not found, check and retry.
The file specified in the “file name” parameter of HARDCOPY
command does not exist on system disk.
Action 1. Verify the desired file name and reenter the command.
2. If the message reappears, load the desired .IMG file to disk.
(Refer to your 4635 LPS Operations Reference chapter on
setting LPS parameters for additional information.)
PR2780 No files found matching mask.
No files were found containing filename characters entered in the
“mask” option of the HARDCOPY command.
Action 1. Recheck and correct “mask” characters. (Refer to your 4635
LPS Operations Reference chapter on setting LPS parameters
for additional information.)
2. Reenter the command.
PR2985 Security violation.
The requested file has been secured by the ABNORMAL
SECURITY = YES command. An attempt was made to access it
at a wrong logon level.
Action To access the file, obtain the correct password and logon at
Level 5. (Refer to your 4635 LPS Operations Reference chapter
on setting LPS parameters for additional information.)
9-2 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE