Xerox 4635 - Manual (Page 32)

HIP (HOST INTERFACE PROCESSOR) MESSAGES
HP2130 Overwrite file name.type: CONFIRM
DUPLICATEFILE = VERIFY was entered in the HIP.CMD file at
installation. A file has been sent having the same name as the
file already existing on system disk.
Action Enter YES if you wish the new file to replace the existing file.
or Enter NO to reject the file transfer.
HP2140 Unable to process jobs list at this time—try again
The HIP START or HIP ABORT command was entered. The
printer is temporarily unable to carry out the requested operation
because of a conflicting ongoing process.
Action Wait one minute, then reenter the HIP START or HIP ABORT
command.
HP2145 Enter ‘HIP show jobs continue’ for more
The HIP JOBS command was entered to display job queue.
Queue contains more than 20 jobs, so all jobs are not shown on
the display.
Action Enter the HIP SHOW JOBS CONTINUE command to display the
rest of the job queue entries.
HP2150 HIP job queue full. Enter ‘HIP START.’
or
HIP job queue full. Select or enter ‘HIP START.’
The HIP job queue is full and processing must start in order to
free space for incoming jobs.
Action None.
HP2160 Enter ‘HIP show log continue’ for more
There are more than 20 entries in the log and you must enter
HIP SHOW LOG CONTINUE to view additional screens.
Action None.
HP2165 Insufficient disk space for log files.
You have entered HIP LOG [START]. There is insufficient disk
space to begin logging.
Action Delete home files to create space for logging procedures.
HP2200 Rejected nonprint file transfer
An unacceptable nonprint file was sent; therefore, the system did
not store it. (Acceptable file types are those specified in the
ACCEPT command in HIP.LIB.)
Action Edit HIP.LIB and add the file extension to the
ACCEPT=command.
4-10 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE