Xerox 4635 - Manual (Page 69)

IFU (INTERPRESS FONT UTILITY) MESSAGES
IF8204 Error: from DLM_open ( )
The system is unable to open the IFUDLM.SYS file. Either the file
is not on the system or is corrupted, or there is a software
problem.
Action 1. Check if the IFUDLM.SYS file is on the system.
2. If IFUDLM.SYS is on the system, it is corrupted and should
be deleted.
3. Retry the command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8205 Error: from IPM_set_family_mask ( )
The IPM file is being processed out of sequence.
Action Contact your systems specialist or Xerox Customer Support.
IF8207 Error: from IPM_set_font_mask ( )
The IPM file is being processed out of sequence.
Action Contact your systems specialist or Xerox Customer Support.
IF8208 Error: from IPM_next_font_entry ( )
The IPM file is being processed out of sequence.
Action Contact your systems specialist or Xerox Customer Support.
IF8209 Error: from FFM_mark_ref ( ) entry ( )
An error occurred when the system attempted to access the
IFUFFM.SYS file. Either the file is not on the system or is
corrupted, or there is a software problem.
Action 1. Check if the IFUFFM.SYS file is on the system.
2. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the ADD command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
F8210 Error: from IPF_read_block ( ) entry ( )
An error occurred when the system attempted to access the
IPFNTS.SYS file. Either the file is not on the system or is
corrupted, or there is a software problem.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 5-31