Xerox 4635 - Manual (Page 139)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2880 Max fonts & forms exceeded. Enter new value. Restart job
JDE called for more fonts and forms per page than were specified
at installation. The job is being aborted.
Action 1. Enter the JDE or DJDE command calling for a number of
forms and fonts within range established at installation.
2. Restart the job.
OS2885 Max number of fonts exceeded.
JDE called for more fonts per page than were specified at
installation. The job is being aborted. The default FONTS value
is 32.
Action 1. Enter the JDE/DJDE command calling for a number of fonts
within the range established at installation.
2. Restart the job.
OS2900 Input block length exceeds JDE max, do the following: *
ABORT and RETRY, specifying another JDE/JDL
A block was input exceeding the maximum block length
specified by JDE. If the job is printed, text will be lost or
misplaced.
Action 1. Enter the ABORT I command.
2. Resend the job, specifying a JDE/JDL calling for greater block
length.
OS2910 No accounting file entry for department.
No accounting file was set up at installation for the department
name entered. The system will report data in a “NODEPT” file.
Action Enter the ACCOUNT command to establish a file for the
department. (Refer to your 4635 LPS Operations Reference
chapter on tracking system activity for additional information.)
OS2915 Security violation.
The requested file was protected by ABNORMAL SECURITY =
YES command. An attempt was made to access a file at the
wrong logon level.
Action To access the file, obtain the correct password and log on at
Level 5. (Refer to your 4635 LPS Operations Reference chapter
on setting LPS parameters for additional information.)
OS2920 FEX error, FEXDMP.JDL not found. Recompile FEXDMP.JSL.
FEX cannot find the file you have requested (FEXDMP.JDL) on the
system disk.
Action Recompile the FEXDMP.JSL and reenter the FEX command.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 6-63