Xerox 4635 - Manual (Page 28)

HIP (HOST INTERFACE PROCESSOR) MESSAGES
HP1220 Host online. Accepting print jobs only
The HIP ONLINE command was entered. The printer and the
remote host are communicating, and the host is sending jobs to
the HIP buffer. Only files to be printed will be accepted.
Action Enter the HIP START command at the system controller keyboard
to initiate printing.
HP1230 Host offline
The HIP OFFLINE or RESET command was entered. The printer
and remote host are no longer communicating.
Action None.
HP1240 Host not responding
The HIP START command was entered but the host is not online
and communicating with printer. (This message is displayed
every 30 seconds until the host comes online or the interface is
terminated.)
Action 1. If using Ethernet, verify that the connection is good and that
the printer network address and network number are correct.
2. If using XPAF, contact your systems specialist or Xerox
Customer Service.
3 . If the failure recurs, call for service .
HP1242 Online interface waiting for communications
HIP is online to the XPAF host and waiting for communications.
Action None.
HP1246 Receiving communications from host
The host has established the data communications link.
Action None.
HP1250 Transmission complete: job id xxxx
The host has completed sending the indicated job to the printer.
The job will now begin printing.
Action None.
HP1260 Interface busy - cannot send file(s)
The HIP SEND command was entered. The interface is busy and
is unable to send files from the host at this time.
Action Wait for current transmission to complete.
HP1265 Online interface already in use
The XPAF host was already online when the HIP HOST XPF
command was entered.
Action None.
4-6 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE