Xerox 4635 - Manual (Page 166)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS6751 Insufficient dynamic memory for word processing link job.
Not enough dynamic memory was available for linked word
processing files. Linked files are processed up to the point
where memory was exhausted.
Action Resend files that were not processed.
OS6752 Insufficient dynamic memory for word processing merge job.
Not enough dynamic memory was available to process CWP
MERGE function. Job will abort.
Action 1. Remake job, reducing features.
2. Purchase additional memory capacity.
3. Resend job.
OS6754 Word processing merge job - switch codes missing.
During printing, a file was discovered to be incorrectly formatted,
or wrong switch code was entered in CCL MERGE command.
Action Resend job, correcting switch codes if necessary. (Refer to your
Xerox 4635 LPS Reference Manual, “Communications interface”
chapters.)
OS6755 Word processing merge job - no merge file.
There is no file name in XCS header for merge file.
Action Check your XCS file header packet.
OS6756 Word processing - document file I/O error.
Error has occurred in reading an .XCS file. Job cannot be
processed.
Action 1. Resend job.
2. If message reappears, call Xerox Customer Support Center.
OS6757 Word processing - old XCS file - retransmit file.
Attempt was made to print a backup file containing a file header
in an obsolete format.
Action Resend job from workstation; do not use the old backup tape.
OS6758 Word processing file malformed. Retransmit file.
A start command was issued specifying an XCS file. The specified
file has an incorrect format.
Action Contact your systems specialist or Xerox Customer Support.
OS6760 Font char width table missing - word proc. aborting job.
An old (pre-V10 version) font file has been loaded. It cannot be
used for CWP jobs. Job is aborting.
Action 1. Restart job, using correct font tape.
2. Call Xerox Font Center for information on replacing font.
6-90 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE