Xerox 4635 - Manual (Page 14)

CP (COMPRESS COMMAND) MESSAGES
CP2710 Keyins are not allowed at this time
Compress process has begun. System cannot process any other
commands entered at this time.
Action 1. Wait for entire compress process to complete.
2. Reenter command.
CP2720 Invalid start command
The COMPRESS start command was entered incorrectly.
Action Reenter COMPRESS.
CP7010 Unable to compress this disk. Use DSR - COMPRESS MODE
The COMPRESS command was entered, but disk contains so
many files that there is not enough internal memory to load
COMPRESS task.
Action Perform DSR, selecting compressed object mode, to compress
the disk. (Refer to your 4635 LPS Operations Reference chapter
on managing LPS resources for additional information.)
CP9100 File integrity error. Edit and print CPR000.TMP
The system has discovered a multi-allocated sector and is listing
it in a special file (CPR000.TMP). The compress function is
terminated.
Action 1. Print CPR000.TMP error log to locate the problem.
2. Call Xerox Customer Service with the information above.
1-2 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE