Xerox 4635 - Manual (Page 256)

4635 LPS ADDITIONAL MESSAGES
3567 Unknown Console Log Record class
Class type in console log record is not in pre-defined set of
possible values.
Action 1. Console log file could be corrupted. Save console log to a
different name for later diagnoses and empty current console
log.
2. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service to investigate
possible hardware disk error.
3577 Marking Console Log Head record failed
Due to hardware considerations, marking a log starting point
has failed.
Action 1. Ensure that write-enabled console log disk is inserted in disk
drive, if applicable.
2. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service to investigate
possible hardware disk error.
3578 A Console Log is being formatted for printing
Formatting of a console log in preparation for printing is currently
in progress. Informational message. No action required.
Action None.
3579 A Console is being transferred to the ESS
Formatting of a console log in preparation for transfer to the
system controller is currently in progress. Informational message.
No action required.
Action None.
Messages 4037 through 4145
The following messages (4037 through 4145) are the results of
problems/warnings/status that could occur when allocating
memory in order to load the PC UI Dialog files.
4037 through 4075 These are general messages.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
4077 through 4085 These messages relate to the loading of the Master File.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
4087 through 4095 These messages relate to the loading of objects
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 15-13