Xerox 4635 - Manual (Page 102)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS1416 Sample not allowed—Printer is busy
The SAMPLE request is not allowed at this time.
Action Retry at a later time.
OS1417 Interpress master not found; check Start command
The file from the START command “DISC:fname” parameter could
not be opened and, thus, the job could not be printed.
Action Restart the job with the correct file name specified
or
resend and restart the job.
OS1420 Page spacing not allowed by JDE
The SPACE n PAGES command was entered. JDE specified
ABNORMAL SECURITY = YES. The system cannot space over
pages.
Action Allow all data to print.
or
Enter the ABORT job command to cancel the job. 2.Recode JDE,
eliminating “ABNORMAL SECURITY = YES.”
OS1421 Page spacing not allowed for N-1 report
Page spacing is not allowed when printing N-1.
Action None.
OS1430 Block spacing not allowed by JDE
The SPACE n BLOCKS command was entered. JDE specified
ABNORMAL SECURITY = YES. The system cannot space over
blocks of text.
Action 1. Allow all data to print.
or
Enter the ABORT job command to cancel the job.
2. Recode JDE, eliminating ABNORMAL SECURITY = YES.
OS1450 Cannot space reports before Start command
The SPACE n REPORTS command was entered. The system
cannot space over reports because START command was not
entered.
Action 1. Enter the START command.
2. Reenter the SPACE command.
OS1460 Cannot space if “Reports:” is specified with Start CMD
The SPACE n REPORTS command was entered. The system
cannot process the command because the REPORTS option of
the START command was entered when the job was started.
Action 1. Allow all data to print.
or
Enter ABORT job to cancel the job.
2. Restart the job without the REPORTS option in the START
command.
6-26 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE