Xerox 4635 - Manual (Page 47)

IFU (INTERPRESS FONT UTILITY) MESSAGES
IF2210 Floppy dismount has failed
The floppy disk is already dismounted. This is a system problem
that may have occurred between the dismounting of one floppy
disk and the mounting of another.
Action None.
IF2211 Floppy mount has failed
The floppy may still be mounted due to the premature execution
of a previous IFU COPY command, it may not be ready to be
mounted yet, or it may be faulty.
Action Retry mounting the same floppy disk or a different one.
or
Reboot the system and reenter the command.
IF2212 The wrong floppy has been mounted
A floppy disk has been mounted out of sequence for reading in.
A message will follow asking if you want to continue or quit this
operation.
Action Mount the correct floppy if you wish to continue.
or
Discontinue the operation.
IF2220 Please enter the next floppy, number x
Mount the floppy disk next in sequence, as indicated in the
message.
Action
IF2230 Insufficient room on floppy. Please try another floppy.
The floppy disk used does not contain enough space to open a
file to write to during an IFU COPY WRITE command.
Action 1. Insert a different floppy disk.
2. Retry the desired activity.
IF2232 Incomplete Interpress font written; missing font files.
When the Interpress font was written to the medium via the IFU
COPY WRITE command, there were missing font files on the
system. The write will complete successfully, but an IFU COPY
READ of this medium will create incomplete Interpress font data
on the system.
Action 1. Copy the missing font(s) onto the system.
2. Reenter the IFU COPY WRITE command.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 5-9