Xerox 4635 - Manual (Page 138)

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
OS2835 Enter ‘D’ for duplex printing, ‘S’ for simplex printing:
This is one of the series of FEX parameter prompts for the test
print job. Additional prompts include messages OS2922,
OS2923, OS2924, and OS1136.
Action Enter D for two-sided or S for one-sided test print job.
OS2840 Output must be stopped before spacing can be done.
The SPACE n PAGES command was entered during printing. The
command cannot be processed.
Action 1. Enter the STOP O command.
2. Enter the SPACE n PAGES command.
OS2860 Approaching disk saturation.
The print file is nearly full. Input is slowing until enough data is
printed to free some cylinders on the system disk.
Action None.
OS2865 Leaving disk saturation.
Enough data has been printed to create space on the system
disk. Input is resuming normal speed.
Action None.
OS2870 Disk saturated. Input is waiting for disk space.
The print file is full. Input has slowed to allow data to print and
create more space on the system disk.
Action None.
OS2871 SDI Job saturates shared disk - possible actions:
Release SDI Jobs and enter 'CONTINUE I'
Enter 'PRINT 1' to print 1 copy of current report
Enter 'ABORT JOB #' to abort current job
A disk full deadlock condition has occurred.
Action Select one of the options listed.
1. If 'CONTINUE I' is selected 'RESUMING INPUT' will be
displayed and the job will resume If disk space has been
freed. The original message will be redisplayed if disk space
is still inadequate.
2. If 'PRINT 1' is selected, input one copy of the report will be
printed and the message 'OS1830 PRINTING 1 COPY OF
CURRENT REPORT' will be displayed.
OS2875 Disk saturation ended. Input resuming.
Input is resuming normal speed because enough space exists on
the system disk.
Action None.
6-62 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE