beautypg.com

Xerox 4635 User Manual

Page 188

background image

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

OS9460-OS9550

thru OS9555-OS9560

“DISK ERROR” Messages.

An apparent fatal disk error occurred during the indicated
process. The job is aborted.

The printer control console displays:

OUTPUT STOPPED. SEE MESSAGE AT CRT.

Action

1. Restart the job. The message should not reappear if the

failure was an intermittent memory error.

2. If the failure recurs, a problem with the system disk is

indicated. Contact your systems specialist or Xerox
Customer Service.

Note: CRT refers to the 4635 LPS system controller display.

OS9460

Disk error - OCS. Call for service.

OS9500

Bad block on disk - Input. Call for service.

OS9530

Disk error - Input. Call for service.

OS9531

Disk error - Processing DJDE‘s.

OS9532

Disk write error - RTEXT File.

OS9537

Disk error or unable to open grid/index font.

OS9540

Unable to open a directory file.

OS9542

File xxxx error - Unable to create file.

OS9543

File xxxx error - Writing to disk file.

OS9550

Disk error - Output. Call for service.

OS9555

Disk I/O Error copying IMG File to Print File.

OS9556

Unidentifiable disk error copying IMG File to Print File.

OS9560

Font memory write error. Call for service.

OS9551

Unable to recover from disk error. Resetting system.

A system disk error has occurred that prevents printing from
continuing. To minimize data loss, a system RESET is being
performed.

Action

In response to the RESET confirmation request, enter Y or press
the key. (Entering N to the confirmation request is
not supported.)

OS9700

Error detected while going offline.

A fatal error has been detected in the online interface when
going offline.

Action

1. Reboot the system by pressing the Boot button, then

entering B.

2. Enter the ONLINE, then OFFLINE commands again.
3. If the failure recurs, contact your systems specialist or Xerox

Customer Service.

OS9800

Hardware error/Disk - Input. Call for service.

A fatal system disk error has occurred in input.

Action

1. Restart the job.
2. If the failure recurs, contact your systems specialist or Xerox

Customer Service.

6-112

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE