Xerox 6204 EN - Manual (Page 85)

8 Special Feature Keys
Wide Format Copy System User Guide 79
Crossfold Options
The CROSSFOLD OPTIONS feature enables you to override the pre-programmed crossfold
settings for the selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and
USE PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting.
CROSSFOLD OPTIONS
CROSSFOLD: USE PROGRAM
Crossfold Options Screen
Title Block Location
The TITLE BLOCK LOCATION feature enables you to specify the location of the title block for the
copy jobs that are about to be run. On the Scan System, select the Finisher Key > Intelligent
Title Block to get to the following screen. The title block location choices are BOTTOM RIGHT,
BOTTOM LEFT, TOP RIGHT, and TOP LEFT. BOTTOM RIGHT is the factory default setting.
INTELLIGENT TITLE BLOCK OPTION
9
INTELLIGENT TITLE BLOCK
Intelligent Title Block Screen
INTELLIGENT TITLE BLOCK should be used if the title block is not located in the desired
location on the folded copy. This selection will use information, document size, selected fold
program, and title block position input to place the title block in a position based on the
information. Intelligent Title Block is DISABLED by default. It may not be the user’s desired
location. Before making this selection, check the following:
• AUTO ROTATE IS SELECTED.
• DOCUMENT BEING SCANNED IS ORIENTED CORRECTLY FOR SCANNING.
• ENSURE THAT THE TITLE BLOCK POSITION SPECIFIED IS CORRECT.
• FOR ADDITIONAL HELP, REFER TO THE FOLDING SUPPLEMENT MANUAL.
NOTE: The title block location may also be selected on the READY TO COPY screen, using the
title block location icon. The title block location is indicated by the dotted lines.
TITLE BLOCK
TB LOCATION: UPPER RIGHT
Title Block Location Screen