Xerox 6204 EN - Manual (Page 30)

2 Getting to know the Wide Format Copy System
24 Wide Format Copy System User Guide
Reduce/Enlarge
The Reduce/Enlarge area of the Scan System Control Panel allows you to select one of three
reduction/enlargement modes - Auto, Manual, and Preset. The illustration below depicts the
Reduce/Enlarge portion of the Control Panel.
NOTE: Reduce/Enlarge can only be selected in Copy mode.
Reduce/Enlarge Area
Auto
Auto automatically adjusts the reduction/enlargement to fit the size of media selected. To select
the Auto mode, press the key beneath Reduce/Enlarge until the Auto indicator lamp illuminates.
NOTE: The size of the output media must be known in advance for this feature to operate.
Therefore, Auto is not a valid selection if both the Synchro cut option and the Sheet and
Auto media source options are selected. If you select this combination, an INVALID
AUTO COMBINATION status is displayed.
Manual
Manual allows you to reduce the image captured by the Scan System to as little as 25%, or as
much as 400%, of the original size before the copy is printed.
To select the Manual mode:
1. Press the key beneath Reduce/Enlarge until the Manual indicator lamp illuminates.
The MANUAL REDUCTION/ENLARGEMENT screen is displayed.
NOTE: If the indicator lamp is already lit, press the key once to display the screen.