beautypg.com

Type line – Xerox 6204 EN User Manual

Page 56

background image

4 Image Quality

50

Wide Format Copy System User Guide

4. Use

the

Enter key to enable/disable checkbox selection and the Next or Previous

Key to select options with a colon (e.g., FORMAT: TIFF).

The options available for selections displayed on the screen will change depending on the
FORMAT and COMPRESSION that are selected. Listed below are the selections and available
options and their definitions:

• PREVIEW - Use this checkbox to enable or disable the generation of a preview

image for your scanned document. Default is enabled (checkbox is checked).
Accxes 13.0 allows for the selection of preview settings Line or Photo.

• FORMAT - Use this selection to determine which format you would like to have the

scanned image saved in, TIFF, CALS (1 BIT only) or PDF/A. Default is TIFF.

The screen shown below only appears in the SCAN mode. Additional image quality

selections are available by pressing the Menu key and scrolling to
CONFIGURATION>COPY OPTIONS>IMAGING or CONFIGURATION> IMAGE
ENHANCEMENT. Refer to the Main Menu section of the manual for additional
information on these selections.

SCAN OPTIONS (NORMAL)

9

PREVIEW

FORMAT:

TIFF

Scan Options (Normal) Screen

Type Line

Line — Select Line for an image containing text, line art, or a mixture of these. If the COPY mode
is selected the READY TO COPY screen will be displayed. If the Mode selected is SCAN, and
the Scan-to-Net feature key is installed, the SCAN OPTION (LINE) screen will be displayed.

SCAN OPTIONS (LINE)

9

FORMAT:

TIFF

PREVIEW

Scan Options (Line) Screen

1. Select

the

Line by pressing the arrow key below the Original, Type key. The SCAN

OPTIONS (LINE) is displayed.

2. Press

the

Previous or Next key to highlight the scan option you wish to change.

3. Select one of the following:

• PREVIEW — DEFAULT IS ENABLED AND A CHECKMARK IS PRESENT IN

THE BOX. PRESS THE ENTER KEY TO ENABLE/DISABLE THE PREVIEW.
WHEN PREVIEW IS ENABLED, A SMALL JPEG (.JPG) FILE IS CREATED
DURING THE SCANNING PROCESS AND STORED ON THE HARD DISK, AS
OF ACCXES 13.0 THE USER HAS THE ABILITY TO SELECT FROM EITHER
LINE OR PHOTO PREVIEWS. THE FREEFLOW ACCXES CLIENT TOOLS

This manual is related to the following products: