Xerox 6204 EN User Manual
Page 139
10 Main Menu
Wide Format Copy System User Guide
133
COMPONENT TESTS
MOTOR SPEED
LEAD EDGE/TRAIL EDGE
SENSORS
Component Tests Screen
8. Press
the
Previous
or Next key to scroll through the list of options.
9. When the desired option is highlighted, press the Enter key to select the option. The
screen for the selected option is displayed.
Motor Speed
The MOTOR SPEED option is for use by the Customer Service Engineer only and requires the
entry of the diagnostic password. It allows the Customer Service Engineer to adjust the Scan
System motor speed and correct magnification error in the process direction.
Lead Edge/Trail Edge
Select the LEAD EDGE/TRAIL EDGE option to execute the lead edge/trail edge adjustment
diagnostic.
To run the LEAD EDGE/TRAIL EDGE diagnostic:
1. Press
the
Menu
key. The MAIN MENU screen is displayed.
2. Press
the
Next
key until DIAGNOSTICS is highlighted.
3. Press
the
Enter
key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is
displayed.
4. Press
the
Next
key until SCANNER DIAGNOSTICS is displayed.
5. Press
the
Enter
key to select SCANNER DIAGNOSTICS. The SCANNER
DIAGNOSTICS menu screen is displayed.
6. Press
the
Next
key until COMPONENT TESTS is highlighted.
7. Press
the
Enter
key to select COMPONENT TESTS. The COMPONENTS TESTS
menu screen is displayed.
8. Press
the
Enter
key to select LEAD EDGE/TRAIL EDGE. The LEAD EDGE/TRAIL
EDGE ADJUSTMENT screen is displayed.
LEAD EDGE/TRAIL EDGE
ADJUSTMENT
PRESS START TO BEGIN
Lead Edge/Trail Edge Adjustment Screen
9. Insert a black sheet (8.5 X 11) of paper into the Scan System.
10. Press the Start key to begin the diagnostic. When the diagnostic completes, the last
line of the display is replaced with a status line indicating PASS or FAIL. The last line