Xerox 6204 EN - Manual (Page 141)

10 Main Menu
Wide Format Copy System User Guide 135
Sensor Locations on the Wide Format Scan System
A : Left Oversize Document Sensor D : Register
B : Exit E : Input
C : Right Oversize Document Sensor F Discrete Width Sensors (Four on
left and four on right)
c) Observe the Display. When the sensor is activated the icon
O is filled in.
d) Move the sheet of paper fully to the left and right to check the LEFT and RIGHT
sensors.
10. To check the status of the thick document sensor:
a) Raise the Thick Document Lever. When the sensor is activated the icon
O is
filled in.
b) When finished viewing the status of the thick document sensor, lower the Thick
Document Lever.
11. To check the status of HOME sensor.
a) Raise the Document Handler just enough to access the Calibration Roll drive
gear and still be able to see the Display.
b) Rotate the Calibration Roll one full revolution. The status will change from NO to
YES if the sensor is okay.
D
A
B
C
E
F
F