Xerox 6204 EN - Manual (Page 34)

2 Getting to know the Wide Format Copy System
28 Wide Format Copy System User Guide
Numeric Keypad and Special Features/Control Keys
The right side of the Scan System Control Panel contains a numeric keypad for entering
quantities, keys for selecting other features, and keys for controlling the scanning and printing of
images. To the left of some of the keys are indicator lamps that illuminate when the associated
feature has been selected.
Stop
Start
1
Transform Sample
Printer
Interrupt
Store/
Recall
Batch
Sets Build
Finisher
A B C
4 5 6
7 8 9
3
0 C/CA /.
2
D E F
G H I J K L M N O
P R S T U V
W X Y
Numeric Keypad
The numeric keypad contains the 0 to 9 numeric keys, the decimal key and the C/CA key.
Numeric (0-9) keys
These keys are used for numeric entry, password entry, and copy quantity fields.
NOTE: The letters next to the numbers are for entering User and Account Ids and Scan Directory
information.
/.
(Decimal key)
This key is used for entering alphanumeric values and string entries for account and user
identities and directory names.
NOTE: The forward slash (/) to the left of the decimal is for future use.
C/CA (Clear/Clear All) key
This key has the following functions:
• When in READY TO COPY mode, one press clears the current copy count to one. Two
presses within one-second resets the copy parameters to the default settings.
• When in READY TO SCAN mode, pressing this key brings up the CLEAR SCANNED
IMAGE screen.
• When in READY TO BUILD SET mode, pressing this key brings up the scanned
document (Refer to Sets Build key section of this manual for additional information).