Xerox 6204 EN - Manual (Page 18)

2 Getting to know the Wide Format Copy System
12 Wide Format Copy System User Guide
A. Standard Stacker
The Stacker is located at the rear of the Scan System. When the AUTORETURN feature is
set to REAR, documents exit the Scan System onto the Stacker. The Stacker can be adjusted
to any one of four positions by raising or lowering it. The height of the Stacker should be
adjusted to accommodate the document being scanned. It has two extensions at its end that
can be pulled out to accommodate longer documents (up to size E or A0). When scanning
most common weight (20 lb, 80gsm) documents, move the Stacker to the 2nd rung from the
bottom.
NOTE: All thick documents, and documents over 36 inches (914 mm), exit from the rear of the
Scan System (regardless of the AUTORETURN setting). When scanning thick
documents, the Stacker must be set to the lowest position for optimum performance.
B. Document Exit Slot
When the DOCUMENT RETURN feature is set to REAR, documents exit the Scan System
through this slot and are delivered to the rear Stacker.
C. Power On/Off Switch
This switch turns the Scan System on and off. Press this switch to the on (I) position to turn
on the Scan System and to the off (O) position to turn off the Scan System.
D. The Power Cord supplies power to the Scan System. Plug one end of the cord into the Scan
System and the other end into an electrical outlet.
E. Status LED
The digital status LED provides an indication of the condition of the Scan System and
communications with the FreeFlow Accxes Controller. A letter “P”, displayed on the LED
Display on the rear of the Scan System, indicates that the Scan System is operating normally
and has established communications with the controller.
F. IEEE 1394 Cable and Connector
The IEEE 1394 Cable is the communications link between the Scan System and the
Controller. Plug one end of the cable into either one of the IEEE 1394 connections at the
rear of the Scan System. Plug the other end into the IEEE 1394 connection on the
Controller.