Xerox 6204 EN - Manual (Page 84)

8 Special Feature Keys
78 Wide Format Copy System User Guide
Tab Options
The TAB OPTIONS feature enables you to override the pre-programmed tab settings for the
selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM
SETTING. USE PROGRAM SETTING is the factory default setting.
TAB OPTIONS
TAB: USE PROGRAM
Tab Options Screen
Punch Options
The PUNCH OPTIONS feature enables you to override the pre-programmed hole punch settings
for the selected finishing program. The choices are ALWAYS ON, ALWAYS OFF, and USE
PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting.
PUNCH OPTIONS
PUNCH: USE PROGRAM
Punch Options Screen
Margin Options
The MARGIN OPTIONS feature enables you to override the pre-programmed margin settings for
the selected finishing program. The choices are ALWAYS OFF and USE PROGRAM SETTING.
Note that ALWAYS ON is not an available setting. USE PROGRAM SETTING is the factory
default setting.
MARGIN OPTIONS
MARGIN: USE PROGRAM
Margin Options Screen
NOTE: When using the Scan System’s width detection sensors, if the document is a little bit off-
center, this could cause problems for folding, especially for A, B, and C size documents.
When using the sensors to detect the width of your document, you must center the
document as you feed it into the Scan System.