Xerox 6204 EN - Manual (Page 58)

4 Image Quality
52 Wide Format Copy System User Guide
Do one of the following:
• For PREVIEW, press the Enter key to enable or disable the option. A
checkmark appears in the box to the left of the option when the option is enabled.
The factory default setting is enabled.
• For COMPRESSION, press the Previous or Next key to highlight the desired
setting. Then press the Enter key to select the highlighted format. The choices
are RAW and PACKBITS. The factory default setting is RAW.
4. For FILE FORMAT, the only selection is TIFF. Repeat steps 3 and 4 to change the
remaining setting, if desired.
5. Press the Enter key to confirm the selection.
6. Press the Exit key to return to the Ready screen.
Type, Color
Color — Select Color when scanning full color documents. When Color Type is selected, a
version of the following screens will be displayed. The content of the screen will depend on the
selected FORMAT and COMPRESSION.
This screen will only be displayed in SCAN mode when the Scan-to-Net and Color Enablement
feature keys are installed. The Normal and Photo LEDs will be lit when Color is selected.
To select the scan options for Color Mode:
1. Press the Mode key. The Please Enter Directory screen is displayed.
2. Enter the Directory Name. The READY TO SCAN INSERT DOCUMENT screen is
displayed.
3. Select the Color by pressing the arrow key below the Original, Type key until the
Normal and Photo lights come on. The SCAN OPTIONS (COLOR) screen is
displayed.
4. Use the Enter key to enable/disable checkbox selection and the Next or Previous
Key to select options with a colon (e.g., FORMAT: TIFF).
The options available for selections displayed on the screen will change depending on the
FORMAT and COMPRESSION that are selected. Listed below are the selections and available
options and their definition:
PREVIEW - Use this checkbox to enable or disable the generation of a preview image for
your scanned document. Default is enabled (checkbox is checked)
FORMAT - Use this selection to determine which format you would like to have the
scanned image saved in, TIFF, JPEG, or PDF/A. Default is TIFF.
COMPRESSION (TIFF selected) - Use this selection to determine the compression
method to apply to the saved TIFF document. Select one of the following:
PACKBITS - Saves the document as 24-bit RGB compressed.
INDEX - Saves the document as 8-bit indexed RGB (using thresholding) compressed
with PACKBITS.
INDEX ED - Saves the document as 8-bit indexed RGB (using error diffusion)
compression with PACKBITS