Xerox 6204 EN - Manual (Page 22)

2 Getting to know the Wide Format Copy System
16 Wide Format Copy System User Guide
Source
The Source option allows you to select the source of the media on which the image will be
printed. To select the media source, press the key beneath the Source settings until the desired
source indicator lamp illuminates.
The Source settings are:
• Sheet – This setting tells the Printer to print from a manually inserted sheet of media.
• R4 – This setting is applicable to the Wide Format Copy System 721P, 6050, 6050A
and 6279. When R4 is selected, both the R1 and R3 indicator lamps illuminate and
the Printer then selects the media stored on Roll 4.
• R3 –When it is selected, the R3 indicator lamp illuminates and the Printer selects the
media stored on Roll 3.
• R2 – This setting tells the Printer to select the media stored on Roll 2.
• R1 – This setting tells the Printer to select the media stored on Roll 1.
For the Xerox Wide Format 6279 printer and 6279 multifunction configuration:
When 3 Tray is selected, the R3 indicator lamp illuminates and the Printer selects the
media stored in Tray 3. When 4 Tray is selected, the R1 and R3 indicator lamps
illuminate and the Printer then selects the media stored in Tray 4.
• Auto (factory default) – This setting automatically selects the roll containing the
media that best fits the size of the captured image. For most documents, the Scan
System is able to automatically detect the width of the scanned document. This
permits the Auto function to automatically select the most appropriate roll of media.
NOTE: The presence of the Sheet feature and the amount of rolls available vary by the type of
WIDE FORMAT PRINTER. If these options are not installed, they cannot be selected. To
print from a cut sheet, Sheet mode must be explicitly selected. The Auto mode cannot
select a cut sheet.
Type
The Type option allows you to select the kind of media on which to print – Bond,
Vellum/Tracing, or Film. To select the media type, press the key beneath the Type settings until
the desired type indicator lamp illuminates.