Xerox 6204 EN - Manual (Page 110)

10 Main Menu
104 Wide Format Copy System User Guide
JIS B B4 257 x 364 mm
B3 364 x 515 mm
B2 515 x 728 mm
B1 728 x 1030 mm
Media Series
The MEDIA SERIES option controls which standard media series are displayed when Preset is
selected from the Output Format portion of the Scan System Control Panel.
You can select one or more media series to be displayed. Refer to Table 5 for a listing of the
sizes associated with each media series.
To enable/disable a media series:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu
screen is displayed.
3. Press the Next key until COPY OPTIONS is highlighted.
4. Press the Enter key to select COPY OPTIONS. The COPY OPTIONS menu screen
is displayed.
5. Press the Enter key to select MEDIA SERIES. The MEDIA SERIES screen is
displayed. Below is an example of the MEDIA SERIES screen.
MEDIA SERIES
ANSI ISO A
ARCH ISO B
JIS B
Media Series Screen
6. Press the Previous or Next key to highlight a media series.
7. Press the Enter key to ENABLE or DISABLE the highlighted media series. A
checkmark appears in the box to the left of the series when the series is enabled.
The factory default setting is ENABLED for the ANSI media series and DISABLED for
all others.
8. Repeat steps 6 and 7 for each media series you wish to enable or disable.
9. Press the Exit key to return to the COPY OPTIONS menu screen.