Xerox 6204 EN - Manual (Page 32)

2 Getting to know the Wide Format Copy System
26 Wide Format Copy System User Guide
Graphical Display and Navigation Keys
The middle portion of the Scan System Control Panel contains the graphical display and the
navigation keys. The illustration below depicts the middle portion of the Control Panel.
Navigational Keys and Graphical Display Area
Graphical Display
The graphical display provides you with information and instructions pertaining to the system. It
consists of up to four lines of text and graphics. The display can be adjusted upward for better
viewing.
Navigation Keys
The navigation keys, located beneath the display, are used to move through the menu screens, to
select items on the screen, and to specify parameters when an options screen is displayed.
Some keys have more than one function depending on the screen being displayed at the time.
These special functions are explained in later sections.
Menu
The Menu key invokes the main menu. If a menu screen is already being displayed, pressing this
key exits the menus and directly returns you to the previous READY State.
Previous
The Previous key highlights the previous item in a displayed list.
Next
The Next key highlights the following item in a displayed list.
Enter
The Enter key either confirms the selection of the currently highlighted item or confirms an
entered numeric value.
Exit
The Exit key cancels a selection operation and returns you to a previous screen. It has other
effects, depending upon the specific situation, that are explained later.
Mode
The Mode key is a valid selection only when READY is displayed on the screen. This key is used
to switch between the READY TO COPY mode and the READY TO SCAN mode. The SCAN
mode can be entered only if the Scan-to-Net feature key is loaded.
Below are examples of the READY screen in COPY and SCAN modes.