Recall factory defaults, Finisher key, Inisher key – Xerox 6204 EN User Manual
Page 81
8 Special Feature Keys
Wide Format Copy System User Guide
75
3. Press
the
Next key until SAVE DEFAULT TEMPLATE is highlighted.
4. Press
the
Enter key to select SAVE DEFAULT TEMPLATE. A confirmation screen is
displayed indicating that the job parameters have been saved.
JOB PARAMETERS SAVED
PRESS ENTER TO CONTINUE
Job Parameters Saved Option
5. Press
the
Enter key to return to the READY screen.
Recall Factory Defaults
The factory default job settings are permanently stored in memory. The RECALL FACTORY
DEFAULTS option of the STORE/RECALL menu enables you to recall the factory default settings
as the active default settings.
To recall the factory default settings:
1. Press
the
Store/Recall key. The STORE/RECALL menu screen is displayed.
2. Press
the
Next key until RECALL FACTORY DEFAULTS is highlighted.
3. Press
the
Enter key to select RECALL FACTORY DEFAULTS. The factory default
settings are immediately recalled. A confirmation screen is displayed.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
Job Parameters Recalled Screen
4. Press
the
Enter key to return to the READY screen.
Finisher key
A finishing device, such as a folder, can be connected to the Wide Format Copy System. If such
a device is connected, the Finisher key enables or disables that device.
To enable/disable a finishing device:
• Press
the
Finisher key. The Finisher indicator lamp illuminates and the FINISHER
menu screen is displayed. The black arrows indicate that the menu contains more
options than are visible. The selected option is highlighted.