Xerox 6204 EN - Manual (Page 55)

4 Image Quality
Wide Format Copy System User Guide 49
IMAGE ENHANCEMENT
COLOR IQ: SRGB
IMAGING
AUTO-ROTATE
MAXIMUM COPY LENGTH: 1200.0 IN
9
REDUCTION LINE PRESERVATION
Imaging screen
REDUCTION LINE PRESERVATION — Selecting the checkbox will preserve fine lines in the
original document when reducing images during copying in Normal and Line mode only.
MAXIMUM COPY LENGTH – To see what your Scan System’s maximum copy length is, select
the Menu key > Configuration > Copy Options > Imaging > Maximum Copy Length. The
default is 100 feet. For the 6030/6050/6050A, the scanned copy would get cut off at 3 meters.
WARNING: Copy documents that are larger than the printer’s maximum capability will not
print correctly, or may not print at all.
IMAGE ENHANCEMENT
COLOR IQ: SRGB
IMAGE ENHANCEMENT
COLOR IQ:
9
DYNAMIC BACKGROUND REMOVAL
SRGB
NORMAL MODE: BEST IQ
Image Enhancement Screen
NORMAL MODE — BEST IQ provides the best image quality, but it is a slower scanning speed.
FASTEST provides a faster scanning speed with lower image quality. It’s only available if the
Turbo III Speed Enhancement feature key is installed.
DYNAMIC BACKGROUND REMOVAL —The Dynamic Background Removal feature, when
enabled, uses information about the document captured during the scanning process to set
image quality settings. The system automatically adjusts for the darkness of the background and
the image content throughout the length of the document. Refer to DYNAMIC BACKGROUND
REMOVAL in the Document Quality section of this manual for additional information.
SCAN MODE
Type and Normal
NOTE: SCAN mode will not be displayed unless the Scan-to-Net feature is enabled. To order
this feature, contact your XEROX representative.
Normal mode attempts to reproduce the document being scanned to provide the best image
quality including halftones and shadings as well as fine lines. To select the scan options for Color
Mode:
1. Press the Mode key. The Please Enter Directory screen is displayed.
2. Enter the Directory Name. The READY TO SCAN INSERT DOCUMENT screen is
displayed.
3. Select the Normal by pressing the arrow key below Original, Type key until the
Normal light comes on. The SCAN OPTIONS (NORMAL) screen is displayed.