Xerox 6204 EN - Manual (Page 8)

1 Safety Notes
2 Wide Format Copy System User Guide
WARNING: This product must be connected to a protective grounded circuit.
This product is supplied with a plug that has a protective grounding pin. This plug will only fit into
a grounded electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use a
grounding adapter plug to connect the product to
an electrical outlet that lacks a grounded
connection terminal.
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only. Operator
access to hazardous areas is restricted with covers or guards, which would require a tool to
remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user documentation
supplied with the product. Do not to carry out any maintenance on this product that is not
described in the customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from the electrical outlet. Always use materials
specifically designated for this product, as the use of other materials may result in poor
performance and may create a hazardous situation. Do not use aerosol cleaners, because they
may be explosive and flammable under certain circumstances.
WARNING – Electrical Safety Information
• Use only the power cord supplied with this equipment.
• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord.
If you do not know if an outlet is grounded, consult a qualified electrician.
If this machine needs to be moved to a different location, contact a Xerox service representative
or your authorized local representative or service support organization
.
• Improper connection of the equipment-grounding conductor can result in electrical shock.
• Do not place this equipment where people might step or trip on the power cord.
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings.
• Never push objects of any kind into slots or openings on this equipment.
• If any of the following conditions occur, switch off the power to the machine immediately and
disconnect the power cord from the electrical outlet. Call an authorized local service
representative to correct the problem.
- The equipment emits an unusual noise or odor.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.