Xerox 6204 EN - Manual (Page 73)

Wide Format Copy System User Guide 67
8 Special Features Keys
Special features keys
There are many enhanced features for making copies that meet special needs. The keys that
control these features are on the right side of the Scan System Control Panel.
To enable a feature, press the applicable key. If the feature has an associated screen, that
screen is displayed when the key is pressed. If any settings are changed from the default state,
the corresponding indicator lamp next to the key illuminates. Pressing the C/CA key on the
numeric keypad twice returns all settings for the feature to the default state and the
corresponding indicator lamp is extinguished.
When the settings for a feature are appropriately set, pressing the same feature key causes the
changes to be accepted and the system returns to the READY state. Pressing a different feature
key while editing a setting is invalid and causes a beep. Pressing a different feature key while not
editing a setting causes the requested feature screen to be displayed.
If a feature has no associated screen, pressing that feature key switches the feature on (enabled)
or off (disabled). When such a feature is enabled, the corresponding indicator lamp is
illuminated.
If the BEEP function (factory default) is enabled, a beep sound will be heard when a key is
pressed. If an improper key is pressed, a multiple beep sound will be heard.
The illustration on the following page depicts the special features portion of the Scan System
Control Panel.