Toshiba e-Studio Imaging 6520c User Manual

Page 96

e-STUDIO5520C/6520C/6530C

2-62

2. Copier-specific Adjustments

Procedures

* Both the service technician and the user can perform all adjustments.

(1) Press the [BASIC] button on the Control Panel. Select "PHOTO" from among the original mode options.

* To have "PHOTO" selected from among the original mode options by default, refer to procedure (1) in 2.8

To Eliminate Moiré.

After selecting the Photo mode, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

(2) Press the [BASIC] button on the Control Panel. Select "IMAGE SMOOTHING" from among the original

mode options.

* To have "IMAGE SMOOTHING" selected from among the original mode options by default, refer to

procedure (1) in 2.8 To Eliminate Moiré.

Caution after the adjustment

Nothing in particular.

This manual is related to the following products: