Toshiba e-Studio Imaging 6520c - Manual (Page 250)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
4-2
4. e-Filing-specific Adjustments
Scan to Box
Scan to Box
‰ Procedures
* Both the service technician and the user can perform all adjustments.
* This adjustment will have an effect only on images stored in the Auto color mode.
(1) This adjustment is effective when you scan an original judged as a black image at the most appropriate
density level in the color modes.
• Use steps (a) to (d) to adjust the density.
(a) Press the [USER FUNCTIONS] button on the Control Panel to enter the "User Functions" menu.
(b) Press the [USER] tab.
(c) Press the [SCAN] button.
(d) Press [
] or [ ] of the "B/W ADJUSTMENT IN ACS" option to adjust the density level for
scanning the original judged as a black image in the Auto color mode.
• If the density level is set to "
," the original will be stored with the low density.
• If the density level is set to " ," the original will be stored with the high density.
After adjusting the density, scan and store the original in the e-Filing box. Then check the image quality.
Only if the user’s desired image quality is still not obtained after the density has been adjusted, use the next
procedure.
* This adjustment will have an effect only on images stored in the Auto color mode.
(2) Select "HIGH QUALITY" from among the "IMAGE QUALITY FOR BLACK" options, to store the black-
and-white original in the Gray scale mode.
• Use steps (a) to (d) to select the "IMAGE QUALITY FOR BLACK" option.
(a) Press the [USER FUNCTIONS] button on the Control Panel to enter the "User Functions" menu.
(b) Press the [USER] tab.
(c) Press the [SCAN] button.
(d) Press the [HIGH QUALITY] button in the "IMAGE QUALITY FOR BLACK" option.
‰
Caution after the adjustment
All scanning functions are implemented with reference to the density and the "IMAGE QUALITY FOR
BLACK" option. They will affect the image quality of black-and-white originals stored in the Auto color mode.
Therefore, carefully perform the adjustment, being aware that the image quality of all future images will be
changed, when storing originals other than the one that is used for the adjustment.
‰
Remarks
• If "HIGH QUALITY" is selected from among the "IMAGE QUALITY FOR BLACK" options and black-and-
white originals are scanned in the Auto color mode and stored in the e-Filing box (Scan to Box), this allows
them to be stored in the Gray scale mode rather than in the binary mode, and eventually provides better
halftones. The data will increase in size, compared to those in the binary mode.
• The adjustment of density will be effective, only if "STANDARD" is selected from among the "IMAGE
QUALITY FOR BLACK" options.