Toshiba e-Studio Imaging 6520c - Manual (Page 221)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-101
3. Printer-specific Adjustments
(3) Enter adjustment mode [05]. Change the values for codes [8042 to 8065] to adjust the color density.
- Adjust the value for [05] code corresponding to the print option to be applied (PDL and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Color = Twin
color, Details = RED, Halftone = Auto
> Text area
Change the values for Y: 05-8062, M: 05-8063 and K: 05-8065.
> Graphic and image area
Change the values for Y: 05-8058, M: 05-8059 and K: 05-8061.
• When printing on Macintosh is performed with the following option selected: Color Type = Black &
Green, Halftone = Smooth
> Change the values for Y: 05-8050, C: 05-8052 and K: 05-8053.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Color to
adjust
PDL Halftone
[05]
code
Subcode
Recommended
value
Acceptable
value
range
Default
Smooth 05-8058 0/1/2
PCL6
Detail 05-8062 0/1/2
Smooth 05-8050 0/1/2
PS3
Detail 05-8054 0/1/2
Smooth 05-8042 0/1/2
Y
(Yellow)
XPS
Detail 05-8046 0/1/2
Smooth 05-8059 0/1/2
PCL6
Detail 05-8063 0/1/2
Smooth 05-8051 0/1/2
PS3
Detail 05-8055 0/1/2
Smooth 05-8043 0/1/2
M
(Magenta)
XPS
Detail 05-8047 0/1/2
Smooth 05-8060 0/1/2
PCL6
Detail 05-8064 0/1/2
Smooth 05-8052 0/1/2
PS3
Detail 05-8056 0/1/2
Smooth 05-8044 0/1/2
C
(Cyan)
XPS
Detail 05-8048 0/1/2
Smooth 05-8061 0/1/2
PCL6
Detail 05-8065 0/1/2
Smooth 05-8053 0/1/2
PS3
Detail 05-8057 0/1/2
Smooth 05-8045 0/1/2
K
(Black)
XPS
Detail 05-8049 0/1/2
Set a value larger
than 128 to
increase the
density.
Set a value
smaller than 128
to decrease the
density.
0 to 256 128
* Set the value in increments of approximately 20, while checking the printouts until the optimum value is
obtained.