Toshiba e-Studio Imaging 6520c - Manual (Page 282)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
5-16
5. Scanning-specific Adjustments
‰ Procedures
* The service technician must perform all adjustments.
(1) Enter adjustment mode [05]. Change the values for codes [1075 to 1077] to adjust the black density of a
scanned-in image.
Color mode Original mode [05] code Recommended value
Acceptable
value range
Default
Text 05-1075
Printed image 05-1076 Full color
Photo 05-1077
Set a value larger than 0. 0 to 4 0
* Setting "0" provides the lightest black, while setting "4" the darkest.
‰ Caution after the adjustment
The adjustment may possibly provide the extremely dark background. Therefore, carefully perform the
adjustment, while checking the scanned-in image.