Toshiba e-Studio Imaging 6520c - Manual (Page 285)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
5-19
5. Scanning-specific Adjustments
5.8 To Register the Original Mode Optimal for a Particular Type of Original
(To have "Custom" selected)
‰ Explanation
If the value for [05] code is adjusted in existing original mode (Text /Photo, Text, Photo, Printed image, Photo or
Gray scale), in order to clearly scan a particular type of original, other types of original may not be clearly
scanned. In this case, add the original mode option adjusted for a particular type of original as "Custom (User
custom)" mode. To have "Custom" selected, add the value adjusted for [05] code in "Custom" mode to the one
in reference original mode.
Select reference original mode for "Custom" from among the original mode options.
To have "Custom" in the Black mode, select the existing original mode option as reference original mode.
To have "Custom" in the Full color mode (including the Auto color mode) selected, select the existing original
mode or "e-document" mode option where the value has been adjusted to identify whiteout areas, as reference
original mode.
* This adjustment will have an effect only on the image scanned in the Black mode or the Full color mode
(including the Auto color mode).
‰ Procedures
* Perform the adjustment in accordance with the procedures below.
* Only the service technician must use procedures (1) and (2).
* Both the service technician and the user can use procedure (3).
(1) Enter setting mode [08]. Change the value for code [580] or [590] to select reference original mode for
"Custom" mode from among the original mode options.
• Select the original mode option, which is most likely to be matched with the image quality the user desires.
For the Black mode
Value for 08-580 Reference original mode
0 Reserved (Default)
1 Text/Photo
2 Text
3 Photo
For the Full color mode
Value for 08-590 Reference original mode
0 Reserved (Default)
1 Text
2 Printed
image
3 Photo
4 e-document
After selecting the reference original mode option, use the next procedure.