Toshiba e-Studio Imaging 6520c - Manual (Page 189)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-69
3. Printer-specific Adjustments
* Applicable only to 1200dpi
(2) Enter the adjustment mode [05]. Increase the setting value of the code [8242] to increase the density level of
thin lines by emphasizing them.
PDL Color [05] code Subcode Recommended value
Acceptable
value range
Default
Black 0 Set value larger than 3 3 PS3
(1200dpi) Color
05-8242
1 Set value larger than 1
0 to 5
1
When the setting value of the color adjustment is increased, thin lines in light colors in printing
at 1200 dpi may turn out darker than at 600 dpi.
For example, when a 3D object such as Word Art is printed at 1200 dpi, the border lines may
become darker.
After setting the value, print the image and check its image quality.
If further image quality adjustment is necessary, use the following procedure:
* Applicable only to 1200 dpi
(3) Enter the adjustment mode [05]. Change the setting value of the code [8243] to adjust a range for
emphasizing thin lines.
PDL Color [05] code Subcode Recommended value
Acceptable
value range
Default
Black (Min.) 0 Set value larger than 1 1
Black (Max.) 1 Set value smaller than 200 200
Color (Min.) 2 Set value larger than 1 1
PS3
(1200dpi)
Color (Max.)
05-8243
3 Set value smaller than 255
0 to 255
255
After changing the value, perform printing and check the image quality.
If further image quality adjustments are necessary, follow the next step. However, the service technician
shall judge whether or not the adjustment is to be performed in conjunction with the settings in steps (1) to
(3).
PS3
PS3