Ricoh Facsimile - Manual (Page 93)

83
5. Reception Features
Reception
Immediate Reception
Each page of a fax message is printed
as soon as it is received. This method
is used for standard fax messages.
Normally this machine receives mes-
sages by Immediate Reception. But
Memory Reception is used when
“Combine 2 originals”, “Multi-copy
Reception”, “RX Reverse Printing” or
“2 Sided Print” is set to “ON”. See
p.96 “Printing Options”. If the condi-
tions are that Substitute Reception
should be used, a fax message is not
printed. It will be stored in memory.
See p.83 “Memory Reception”. See
p.85 “Substitute Reception”.
Note
❒ The machine may not be able to re-
ceive fax messages when free
memory space is low.
❒ If free memory reaches 0% during
Immediate Reception, any further
reception becomes impossible and
the current communication is ter-
minated.
❖ ❖ ❖ ❖ Reception resolution
This machine supports Standard,
Detail, and Super Fine resolutions
for reception. If you do not have
the optional Expansion Memory,
faxes sent at Super Fine resolution
will be printed on your machine at
Detail resolution. This may differ
from the sender's intended resolu-
tion. See p.30 “Resolution”, Facsim-
ile Reference .
Memory Reception
The machine waits until all pages of
the message have been received into
memory before printing it.
This method is used with the follow-
ing functions:
• Combine 2 originals
See p.99 “Combine Two Origi-
nals”.
• Multi-copy when set to multiple
copies
See p.98 “Multi-copy Reception”.
• Reverse Order Printing
See p.100 “Reverse Order Print-
ing”.
• 2 sided Printing
See p.97 “Two-Sided Printing”.
JupterC2_Fax_EN-F_FM.book Page 83 Monday, November 29, 2004 3:48 PM