Ricoh Facsimile User Manual

Page 140

Simplifying the Operation

130

B Perform the Send Later setting

till the procedure of pressing
[OK]

to return to the standby

mode.

Reference

p.3 “Sending at a Specific
Time (Send Later)”

BBBB

Make sure that the machine is in
facsimile mode and the standby
display is shown.

Note

❒ If the standby display is not

shown, press the

{{{{Facsimile}}}} key.

CCCC

Press the

{{{{Program}}}} key.

DDDD

Make sure that [Register] is select-
ed.

EEEE

Select a program number in which
“*Not Stored” is shown.

Note

❒ If you make a mistake, press

[Cancel]

and select a program

number again.

❒ When you change a Keystroke

Program, press [Register] after
pressing the program number
you want to change. If you
make a mistake, press [Do not
Register]

and return to step

FFFF

Enter the program name, and then
press [OK].
The standby display appears.

Note

❒ If you make a mistake, press

[Backspace]

or [Delete All], and

then try again.

❒ You should register the pro-

gram name.

❒ To cancel a programmed pro-

gram, press [Cancel]. The dis-
play returns to that of step

Reference

“Entering Text”, General Set-
tings Guide

Registering a priority function using a
program

You can select whether or not the
function registered in program No. 1
will be set after the power is turned
on or the

{{{{Clear Modes}}}} key is pressed.

After registering a function in pro-
gram No. 1, select [Program No.1] for
[Change Initial Mode]

on the Facsimile

Features menu. See p.144 “General
Settings/Adjustment”.

Limitation

❒ You cannot register the following

using program No.1:
• Any destination
• Store File
• Polling Transmission
• Sender Settings
• Specifying a stored file
• Enter Subject of E-mail Options

ZLFS310N

FaxAdEN_Chapter-7 Page 130 Tuesday, December 28, 2004 6:45 PM