Ip-fax settings – Ricoh Facsimile User Manual

Page 160

Facsimile Features

150

IP-Fax Settings

Make settings to use IP-Fax.
Set H.323 for the gatekeeper, SIP for
SIP server, and gateway for G3 fax if
necessary. Check the settings of the
network to which this machine is con-
nected before making settings.

Note

❒ The following characters can be

used for registration of the alias
telephone number in H.323 Set-
ting. Make sure you enter these
characters correctly:
• Numbers
• Symbols (# and *)

❒ The following characters can be

used for registration of the SIP
User Name in SIP Setting. Make
sure you enter these characters
correctly:
• Alphanumerical lower and up-

per cases

• The 21 symbols in the table be-

low.

❒ Enter the correct IP addresses for

the gatekeeper, SIP server and
gateway, which you have been in-
formed by the network Adminis-
trator, using numbers and a period
(“.”).

❖

❖ Enable H.323

Specify whether or not H.323 is
used for IP-Fax transmission.
• On
• Off

❖

❖ Enable SIP

Specify whether or not SIP is used
for IP-Fax transmission.
• On
• Off

❖

❖ H.323 Settings

Set the IP address and alias tele-
phone number of the gatekeeper.

Note

❒ If you select “On” using the

User Parameters, you can use
the gatekeeper server. See p.166
“User Parameters”(switch 34,
bit 0)

Press [H.323 Settings].

Press [Change] for each proper-
ty.

;

‘

(

)

FaxAdEN_Chapter-8 Page 150 Monday, December 13, 2004 5:34 PM