Ricoh Facsimile User Manual

Page 20

Transmission Mode

DDDD

Depending on the Confidential
Transmission type, use one of the
following procedures:

Default ID

A Check that [Default ID] has been

selected, and then press [OK].

Note

❒ To cancel Confidential Trans-

mission, press [Cancel]. The
display returns to that of step

Override ID

A Select [ID Override: ].
B Enter the Confidential ID (4-

digit number) using the num-
ber keys, and then press [OK].

“ID Override: ” and the entered
Confident ial ID are shown
above the highlighted [Confiden-
tial TX]

Note

❒ If you make a mistake, press

[Clear]

or the

{{{{Clear/Stop}}}} key

before pressing [OK], and
then try again.

❒ To cancel Confidential Trans-

mission, press [Cancel]. The
display returns to that of step

EEEE

Press [OK].
The standby display appears.

Note

❒ To check the settings, press

[Transmission Mode]

FFFF

Dial, and then press the

{{{{Start}}}}

key.

Note

❒ You can cancel the transmission

setup for Confidential Trans-
mission. See p.19 “Canceling a
Transmission”.

JupterC2_Fax_EN-F_FM.book Page 10 Monday, November 29, 2004 3:48 PM