4manual dial – Ricoh Facsimile User Manual
Page 68
Other Transmission Features
58
4
Manual Dial
The optional handset or an external telephone is required.
Pick up the optional handset or the
handset of the external telephone and
dial. When the line is connected and
you hear a high-pitched tone, press
the
{{{{Start}}}} key to send your fax mes-
sage. If, on the other hand, you hear a
voice at the other end, continue con-
versation as normal.
Limitation
❒ This function is not available for
the optional extra G3 interface
unit, Internet Fax and IP-Fax.
❒ If Immediate TX Result Report
(Immediate Transmission) is print-
ed, the result of a transmission
with Manual Dial is not mentioned
in the report.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference
Reference
BBBB
Pick up the handset.
You will hear a tone.
CCCC
Dial.
The machine immediately dials the
destination.
Note
❒ If you make a mistake, replace
the external telephone, and then
try again from step
B
.
DDDD
When the line is connected and
you hear a high-pitched tone,
press the
{{{{Start}}}} key to send your
fax message.
The transmission starts.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
EEEE
Replace the handset.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the
{{{{Clear/Stop}}}} key,
and then remove the originals.
JupterC2_Fax_EN-F_FM.book Page 58 Monday, November 29, 2004 3:48 PM