Ricoh Facsimile User Manual

Page 103

Reception Functions

Routing E-mail Received via SMTP

E-mail received via SMTP can be routed to other fax machines. It can also be
routed to destinations programmed as Quick Dial entries or Groups.

Preparation

Before routing e-mail received via SMTP, you first must set “SMTP RX File
Delivery Settings” to “On”. See p.148 “E-mail Settings” .

Limitation

❒ Depending on security settings, this function may not be available.

Note

❒ If an e-mail transfer request is received when the “SMTP RX File Delivery Set-

tings” to “Off”, this machine responds with an error message to the SMTP
server.

❒ You can make settings that limit transfer to specified originators. See p.148

“E-mail Settings”.

❒ Using this function, you can also send documents from your e-mail software

to e-mail addresses and G3 fax machines' destinations through this machine
simultaneously. For details about specifying the destinations of fax machines,
see the following.

ADJ012S

JupterC2_Fax_EN-F_FM.book Page 93 Monday, November 29, 2004 3:48 PM