Ricoh Facsimile - Manual (Page 185)

Using Administrator Settings
175
9
FFFF
Select the destination to program
or change.
When programming a new Special
Sender, press [* Not Programed].
GGGG
Enter a destination name, and then
press [OK].
Enter a destination name using
Own Name or Own Fax Number.
Reference
“Entering Text”, General Set-
tings Guide
HHHH
Press [Full Agreement] or [Partial Agree-
ment]
.
IIII
Select the item you want to pro-
gram.
Note
❒ You must select only the item
you want to program.
❒ To cancel these settings, press
[Cancel] . The display returns to
that of step E .
Authorized RX (Authorized
Reception)
A Select [Authorized RX].
B Press [On] or [Off], and then
press [OK].
Note
❒ After you perform step K , set
“Authorized RX” of “Recep-
tion Settings” to “On”. See
p.147 “Reception Settings”.
Forwarding
A Select [Forwarding].
B Select [On] or [Off].
If you select [Off], proceed to
step
D.
Note
❒ Selecting [Same as Basic Set-
tings] will result in the same
setting made for “Forward-
ing” under “Administrator
Tools”. See p.162 “Forward-
ing”.
JupterC2_Fax_EN-F_FM.book Page 175 Monday, November 29, 2004 3:48 PM