Ricoh Facsimile - Manual (Page 166)

Administrator Setting
156
9
Box Setting By using SUB and SEP Codes
with these functions, you can
send messages to another par-
ty's box, and retrieve messag-
es stored in boxes. p.180 “Box Settings”
Transfer Report Before using Transfer Re-
quest, you need this Transfer
Report setting. p.190 “Transfer Report”
Program Confidential ID Registers an ID required for
Confidential communication. p.191 “Programming a Confi-
dential ID”
Program Polling ID Registers an ID required for
Polling communication. p.192 “Programming a Polling
ID”
Program Memory Lock ID Registers an ID required for
Memory Lock reception. p.192 “Programming a Memo-
ry Lock ID”
Select Dial / Push Phone Selects a line type when you
connect the machine to a G3
analog line.
Note
❒ This function is not avail-
able in some areas.
p.193 “Selecting Dial/Push
Phone”
Reception File Setting Selects whether received doc-
uments are saved on the hard
disk to be printed later or
printed immediately without
being saved. p.193 “Storing or Printing Re-
ceived Documents”
Stored RX File User Setting Set the password to view re-
ceived and stored documents
using a Web Image Monitor or
DeskTopBinder Lite. p.195 “Setting a User for
Viewing Received and Stored
Documents”
Menu Protection Settings Set protection so only the Ad-
ministrator can change menu
settings. p.196 “Menu Protection Set-
tings”
Function name Description Reference
JupterC2_Fax_EN-F_FM.book Page 156 Monday, November 29, 2004 3:48 PM