Ricoh Facsimile - Manual (Page 212)

Appendix
202
11
Selecting the Line Type
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Note
❒ This function is not available in some areas.
Select the line type using “Administrator Settings”. See p.193 “Selecting Di-
al/Push Phone”.
Connecting the Optional Handset or an External Telephone
You can connect the optional handset or an external telephone to the machine.
You can use it for telephone calls.
Note
❒ Some external telephones may not be connected or may suffer reduced func-
tionality.
Limitation
❒ When you use the optional handset or an external telephone with the {{{{On
Hook Dial
}}}} key for telephone calls, you can not talk with the other party with-
out pressing the
{{{{On Hook Dial}}}} key after taking off the receiver.
❖ ❖ ❖ ❖ Specifying the handset line type
The switch on the handset should be in the appropriate position-TT (Tone Di-
aling) or DP (Pulse Dialing).
DP TT
ND1X00E0
JupterC2_Fax_EN-F_FM.book Page 202 Monday, November 29, 2004 3:48 PM